EMVeM Research Network: People, Topics and Shared Questions

EMVeM joined researchers working on batteries, vibration, machines, simulation and control. Those subjects can look like separate specialties until a system has to do a real job: store energy, move a load, complete a cycle and remain within its operating limits. The historical network is useful as a map of how those questions were connected.

This guide reconstructs the public consortium and fellowship records. Organisation names and research topics describe their place in the archived programme, not current employment or an affiliation with this publication. For the difference between power and energy in the overall research question, start with the EMVeM introduction.

A consortium and an associated network

The archived consortium page separates twelve consortium partners from nine associated partners. Preserving that distinction is more accurate than putting every name into a single list of identical roles.

The consortium list names KU Leuven; the University of Udine; the University of São Paulo; Transilvania University of Brașov; Fraunhofer; Flanders Make, identified there with its former FMTC name; CNR-ITIA; Ikerlan; the Austrian Institute of Technology; Siemens Industry Software; BMW; and TextilTechnologieTransfer, or 3T.

The associated list names ORONA; Gildemeister Italiana; Mondragon University; TU Darmstadt; RWTH Aachen; Politecnico di Milano; CLEPA; Vienna University of Technology; and the University of the Basque Country.

A participant list tells a reader where expertise was assembled. It does not identify who produced every result. For a particular finding, follow the authorship and methods in the corresponding paper or report. For the historical programme as a whole, use the CORDIS grant record, 315967.

The research topics behind the fellowship list

The surviving fellows page names eighteen researchers. The compact grouping below follows the topics described in their profiles; it is a reading aid, not the project’s formal work-package structure.

  • Storage and control: Arlavinda Rezqita, Víctor Isaac Herrera Pérez, Vasco Delgado-Gomes and Indrajeet Prasad worked on battery materials, storage modelling or hybrid energy systems.
  • Vibration, sensing and structures: Daniel Casagrande, Mariam Jaber, Simona Moschini, Sara Perfetto, Ioannis Dafnomilis, Francesco Infante and Philip Becht were associated with vibration, harvesting, structural behaviour or sensing questions.
  • Machines and motion: Andrés Gómez Ruiz, Jeremi Wojcicki, Corrado Grassi and Branimir Mrak addressed manipulators, machine tools, textile machinery or electromechanical drives.
  • Simulation and design exploration: Josef Mueller, Niccolò Cappellini and Henri Karhula were connected with simulation, model complexity, mechanical modelling or design exploration.

The value of such a map is in the interfaces. A storage model supplies assumptions to a vehicle simulation. A control strategy changes the loads a component experiences. A vibration measurement can inform a mechanical model. Improving one representation does not automatically improve the whole system if the connections between them remain inconsistent.

A useful question at each hand-off

Imagine an illustrative engineering team comparing two machine-control strategies. One researcher models the drive, another the storage system, and a third the task being performed. Before combining the outputs, the team needs to agree on the boundary of each model: what enters it, what leaves it and what assumptions it makes about the other parts.

If one model reports a peak value while another expects an average over a cycle, the connection is ambiguous even when both individual calculations are correct. If one scenario completes less work, a lower energy figure may describe a different task rather than an improvement. These are explanatory examples, not additional findings attributed to EMVeM.

A practical reading of a systems paper therefore starts at a hand-off. Identify one quantity passed between two components and ask how it is defined, over what period it is measured and whether the receiving model uses the same definition. That small check often reveals what information is needed before a larger comparison can be interpreted.

Training was part of the historical programme

A surviving Marie Curie workshop document advertised entrepreneurial-skills training in Heverlee on 14–15 May 2013. Its tentative agenda covered communication, teamwork, project management and time management. The attached registration form is a historical part of that document; bookings are not offered here.

The agenda is a reminder that a technical network also has to coordinate decisions. A model can be mathematically detailed while its assumptions remain poorly communicated between collaborators. Recording the meaning and limits of an output is part of making it usable by the next person.

What the old vacancies do—and do not—show

The vacancy material describes recruitment during the project period, including a position concerning hybrid energy storage at Transilvania University. It is evidence of the topics the network sought to develop. It is not an open application invitation, and this site does not recruit or collect applications on behalf of those organisations.

To follow the research now, begin with a topic and an identified publication or project report. Treat the archived profiles as historical leads. A dated profile helps locate a research question; a later result still needs its own source.